OEM Pro Am Tools - Torque Multiplier

X4 TORQUE MULTIPLIERS
Made In USA

The mechanical advantage in the use of your torque multiplier is derived from the planetary transmission within the gear head of the tool. With the torque mulitplier reaction bar in the fixed position against a stationary object, and the tool input driving, the socket and fastener sees forces equaling the ration of the torque multiplier or combination of multipliers being used times the input force. Due to frictioanal loss in the gear train, a torque loss of 10% to 20% should be anticipated. In breaking a difficult or frozen fastener, the driving force is simply reversed. It is important to set the reaction bar against a strong stationary object. The reaction bar rotation is opposite the output force rotation.

	MATHEMATICS OF THE X-4 MULTIPLIER
	When the torque multiplier is used, it's mechanical advantage applies a factor equal to the following equation. F x D x Multiplier Factor = T x Multiplier Factor It can thus be seen that the same applied force F results in several times the total turning force when the X-4 tool is used. In most wrench applications the the force relationship may be expressed by the following formula. F (force) x D (distance) = T (torque) F = turning force in lbs applied by the operator D = lenght of lever arm in inches or feet T = total input force applied to wrench in inch-pounds or foot-pounds.

OEM Pro Am Tools - Quality Tools & Equipment Serving Trades & Industry Since 1977

OEM Pro Am Tools - X4 Torque Multipliers